Reference Guide
• iscsi: enables the advertisement of iSCSI in application priority TLVs.
Defaults Application priority TLVs are enabled to advertise FCoE and iSCSI.
Command Modes PROTOCOL LLDP
Supported Modes Programmable-Mux (PMUX)
Command History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
9.2(0.0) Introduced on the M I/O Aggregator.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information To disable TLV transmission, use the no form of the command; for example, no advertise dcbx-
appln-tlv iscsi.
advertise dcbx-tlv
On a DCBX port with a manual role, congure the PFC and ETS TLVs advertised to DCBX peers.
Syntax
advertise dcbx-tlv {ets-conf | ets-reco | pfc} [ets-conf | ets-reco | pfc]
[ets-conf | ets-reco | pfc]
To remove the advertised ETS TLVs, use the no advertise dcbx-tlv command.
Parameters
{ets-conf | ets-reco
| pfc}
Enter the PFC and ETS TLVs advertised, where:
• ets-conf: enables the advertisement of ETS conguration TLVs.
• ets-reco: enables the advertisement of ETS recommend TLVs.
• pfc: enables the advertisement of PFC TLVs.
Defaults All PFC and ETS TLVs are advertised.
Command Modes PROTOCOL LLDP
Supported Modes Programmable-Mux (PMUX)
Command History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
9.2(0.0) Introduced on the M I/O Aggregator.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
You can congure the transmission of more than one TLV type at a time; for example: advertise dcbx-
tlv ets-conf ets-reco.
You can enable ETS recommend TLVs (ets-reco) only if you enable ETS conguration TLVs (ets-
conf). To disable TLV transmission, use the no form of the command; for example, no advertise
dcbx-tlv pfc ets-reco
.
91