Reference Guide

show hardware system-ow
Display Layer 2 ACL or QoS data for the selected stack member and stack member port-pipe.
Syntax
show hardware system-flow layer2 stack-unit 0–5 port-set 0–0 [counters]
Parameters
acl | qos For the selected stack member and stack member port-pipe, display which system
ow entry the packet hits and what queue the packet takes as it dumps the raw
system ow tables.
stack-unit 0–5 Enter the keywords stack-unit then 0 to 5 to select a stack member ID.
port-set 0–0
[counters]
Enter the keywords port-set with a port-pipe number—0.
(OPTIONAL) Enter the keyword counters to display hit counters for the selected
ACL or QoS option.
Defaults none
Command Modes EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
Example
Dell#show hardware system-flow layer2 stack-unit 0 port-set 0
counters
---------------------------------------------------------------------------
EntryId Description #HITS
---------------------------------------------------------------------------
767 LLDP BPDU Redirects 2611
765 LACP traffic Redirects 250
763 ARP Reply Redirects 0
762 Slow Protocol Drops 1155
758 OSPFv3 Multicast
[33:33:00:00:00:06] 0
759 OSPFv3 Multicast
[33:33:00:00:00:05] 0
756 GRAT ARP 0
711 VLT ARP Replies for Peer 0
710 ICL Hellos 0
709 ICL MAC SYNC Frames 0
708 VLT STP BPDUs Tunneled 0
707 VLT IGMP Sync Frames 0
706 VLT ARP Replies Tunneled 0
705 VLT L2PM Sync Frames 0
704 VLT ARP Sync Frames 0
703 VLT IPM Sync Frames 0
701 VLT NDPM Sync Frames 0
699 VLT TTL1 Packets Tunneled 0
698 VLT Dyn Client pkts 0
697 VLT PIM Sync Frames 0
696 VLT MRTM Sync Frames 0
695 VLT SMUX Sync Frames 0
693 DROP Cases 0
509 BGP_SPORT PACKETS 0
508 BGP_DPORT PACKETS 0
507 MSDP_SPORT PACKETS 0
506 MSDP_DPORT PACKETS 0
510 IGMP PACKETS WITH IP OPTIONS 26
505 FP Entry for OSPF IPv4 Unicast 0
347