Reference Guide

enable restricted
Allows Dell Networking technical support to access restricted commands.
Syntax
enable restricted [encryption-type] password
To disallow access to restricted commands, use the no enable restricted command.
Parameters
encryption-type
(OPTIONAL) Enter the number 7 as the encryption type.
Enter 7 followed a text string as the hidden password. The text string must be a
password that was already encrypted by a Dell Networking router.
Use this parameter only with a password that you copied from the show
running-config le of another Dell Networking router.
password Enter a text string, up to 32 characters long, as the clear text password.
Command Modes Not congured.
Supported Modes All Modes
Command History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage Information Only Dell Networking Technical Support sta use this command.
service password-encryption
Encrypt all passwords congured in Dell Networking OS.
Syntax
service password-encryption
To store new passwords as clear text, use the no service password-encryption command.
Defaults Enabled.
Command Modes CONFIGURATION
Supported Modes All Modes
Command History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage Information
CAUTION: Encrypting passwords with this command does not provide a high level of security.
When the passwords are encrypted, you cannot return them to plain text unless you re-congure
them. To remove an encrypted password, use the no password password command.
To keep unauthorized people from viewing passwords in the switch conguration le, use the service
password-encryption command. This command encrypts the clear-text passwords created for user
290