Reference Guide

Parameters
brief Displays an overview of current server CNA-fabric connections over an FN I/O Aggregator with the FC
Flex IO module NPIV proxy gateway.
Command Modes
• EXEC
• EXEC Privilege
Supported Modes All modes
Command History
Version Description
9.6.(0.0) Supported on the FN2210S Aggregator.
9.3(0.0) Introduced on the M I/O Aggregator and MXL 10/40GbE Switch with the FC Flex IO module.
Usage Information
Use the show npiv devices command to display information on the server CNA, server-facing Ethernet and fabric-facing FC
ports, and the SAN fabric in each server-fabric connection over an FN I/O Aggregator with the FC Flex IO module NPIV proxy
gateway.
The following table describes the show npiv devices brief output shown in the example below.
Field Description
ENode-Intf FN I/O Aggregator with the FC Flex IO module Ethernet interface (slot/port) to which a server CNA is
connected.
ENode-WWPN Worldwide port name (WWPN) of a server CNA port.
FCoE-Vlan VLAN ID of the dedicated VLAN used to transmit FCoE trac to and from the fabric.
Fabric-Intf Fabric-facing Fibre Channel port (slot/port) on which FC trac is transmitted to the specied fabric.
Fabric-Map Name of the FCoE map containing the FCoE/FC conguration parameters for the server CNA-fabric
connection.
LoginMethod Method used by the server CNA to log in to the fabric; for example:
FLOGI - ENode logged in using a fabric login (FLOGI).
FDISC - ENode logged in using a fabric discovery (FDISC).
Status Operational status of the link between a server CNA port and a SAN fabric: Logged In - Server has logged
in to the fabric and is able to transmit FCoE trac.
Example
Dell# show npiv devices brief
Total NPIV Devices = 2
-------------------------------------------------------------------------------------------
ENode-Intf ENode-WWPN FCoE-Vlan Fabric-Intf Fabric-Map LoginMethod Status
------------------------------------------------------------------------------------------
Te 0/12 20:01:00:10:18:f1:94:20 1003 Fc 0/5 fid_1003 FLOGI
LOGGED_IN
Te 0/13 10:00:00:00:c9:d9:9c:cb 1003 Fc 0/0 fid_1003 FDISC
LOGGED_IN
Usage Information
The following table describes the show npiv devices output shown in the example below.
248