Reference Guide

show interfaces status
Displays a summary of interface information or specify a stack unit and interface to display status information for that specic
interface only.
Syntax
show interfaces [interface | stack-unit unit-number] status
Parameters
interface (OPTIONAL) Enter one of the following keywords and slot/port or number
information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
linecard slot-
number
(OPTIONAL) Enter the keyword linecard then the slot number.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Supported Modes All modes
Command History
Version Description
9.6(0.0) Supported on the FN 2210S Aggregator.
9.4(0.0) Supported on the FN I/O Aggregator.
9.3(0.0) Supported on the M I/O Aggregator.
Example
Dell#show interface status
Port Description Status Speed Duplex Vlan
Te 0/1 Up 10000 Mbit Full 1-4094
Te 0/2 Up 10000 Mbit Full 1-4094
Te 0/3 Up 10000 Mbit Full 1-4094
Te 0/4 Up 10000 Mbit Full 1-4094
Te 0/5 Up 10000 Mbit Full --
Te 0/6 Up 10000 Mbit Full 1-4094
Te 0/7 Up 10000 Mbit Full --
Te 0/8 Up 10000 Mbit Full --
Te 0/9 Up 10000 Mbit Full --
Te 0/10 Up 10000 Mbit Full --
Te 0/11 Up 10000 Mbit Full --
Te 0/12 Up 10000 Mbit Full --
Dell#
show npiv devices
Displays the FCoE and FC devices currently logged into an FN I/O Aggregator Switch with the FC Flex IO module NPIV proxy
gateway.
Syntax
show npiv devices [brief]
247