Reference Guide

keepalive
In an FCoE map, enable the monitoring of FIP keepalive messages (if it is disabled).
Syntax
keepalive
Parameters None
Defaults FIP keepalive monitoring is enabled on Ethernet and Fibre Channel interfaces.
Command Modes FCoE MAP
Supported Modes Programmable-Mux (PMUX)
Command History
Version Description
9.6(0.0) Supported on the FN 2210S Aggregator.
9.3(0.0) Introduced on the M I/O Aggregator and MXL 10/40GbE Switch with the FC Flex
IO module.
Usage Information
FIP keepalive (FKA) messaging is used to detect if other FCoE devices are reachable.
To remove FIP keepalive monitoring from an FCoE map, enter the no keepalive command.
Related Commands
fcoe-map— creates an FCoE map which contains the parameters used in the communication between
servers and a SAN fabric.
show fcoe-map— displays the Fibre Channel and FCoE conguration parameters in FCoE maps.
show fcoe-map
Display the Fibre Channel and FCoE conguration parameters in FCoE maps.
Syntax
show fcoe-map [brief | map-name]
Parameters
brief Displays an overview of currently congured FCoE maps.
map-name Displays the FC and FCoE conguration parameters in a specied FCoE map. The
FCoE map is applied on Ethernet (FCoE) and FC ports to transmit FC storage
trac to a specied fabric.
Command Modes
• EXEC
• EXEC Privilege
Supported Modes All modes
Command History
Version Description
9.6(0.0) Supported on the FN2210S Aggregator.
9.3(0.0) Introduced on the M I/O Aggregator and MXL 10/40GbE Switch with the FC Flex
IO module.
244