Reference Guide
feature fc
Enables the Fibre channel communication via the NPG functionality.
Syntax
feature fc
Command Modes CONFIGURATION
Supported Modes Programmable-Mux (PMUX)
Default Enabled
Command History
Version Description
9.6(0.0) Supported on the FN I/O Aggregator.
9.3(0.0) Supported on the M I/O Aaggregator.
Usage Information The command is supported only in FN2210S Aggregator.
fka-adv-period
In an FCoE map, congure the time interval used to transmit FIP keepalive (FKA) advertisements.
Syntax
fka-adv-period seconds
Parameters
seconds Enter the time period (in seconds) used to send FIP keepalive messages to peer
devices. The range is from 8 to 90 seconds.
Defaults 8 seconds
Command Modes FCoE MAP
Supported Modes All Modes
Command History
Version Description
9.6(0.0) Supported on the FN 2210S Aggregator.
9.3(0.0) Introduced on the M I/O Aggregator and MXL 10/40GbE Switch with the FC Flex
IO module.
Usage Information
To delete the FIP keepalive time period from an FCoE map, enter the no fka-adv-erpiod command.
Related Commands
fcoe-map — creates an FCoE map which contains the parameters used in the communication between
servers and a SAN fabric.
show fcoe-map— displays the Fibre Channel and FCoE conguration parameters in FCoE maps.
243