Reference Guide

----------------- -- -- - - ----- ----------------- -------------
10.10.10.10 0 0 1 1 0 00:00:00:00:00:00 3f01 CP
Dell#
show ip route
View information, including how they were learned, about the IP routes on the switch.
Syntax
show ip route [hostname | ip-address [mask] [longer-prefixes] | list
prefix-list [process-id] | connected | static | summary]
Parameters
ip-address (OPTIONAL) Specify a name of a device or the IP address of the device to view
more detailed information about the route.
mask (OPTIONAL) Specify the network mask of the route. Use this parameter with the
IP address parameter.
longer-prexes (OPTIONAL) Enter the keywords longer-prefixes to view all routes with a
common prex.
list prex-list (OPTIONAL) Enter the keyword list and the name of a congured prex list.
process-id (OPTIONAL) Specify that only OSPF routes with a certain process ID must be
displayed.
connected (OPTIONAL) Enter the keyword connected to view only the directly connected
routes.
static (OPTIONAL) Enter the keyword static to view only routes congured by the ip
route command.
summary (OPTIONAL) Enter the keyword summary.
Command Modes
• EXEC
• EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage Information The following describes the show ip route all command in the following example.
Field Description
(undened) Identies the type of route:
• C = connected
• S = static
• R = RIP
• B = BGP
• IN = internal BGP
199