Reference Guide
Name Displays the name of the NVMe PCIe SSD. The name comprises the bay ID and the slot ID in which the NVMe
PCIe SSD 2.5 inch SFF is installed.
State Displays the current state of the NVMe PCIe SSD 2.5 inch SFF.
Bus Protocol Displays the technology that the NVMe PCIe SSD 2.5 inch SFF is using.
Device Name In Windows: \\.\PhysicalDriveX.
In Linux: /dev/nvmeXn1.
Media Displays the media type of the physical SSD.
Remaining Rated
Write Endurance
Displays the warranted wear out level of the NVMe PCIe SSD (in percentage).
Firmware Revision Displays the current running rmware version on the NVMe PCIe SSD.
Driver Version Displays the current running driver version of the NVMe PCIe SSD.
Model Number Displays the Piece Part Identication (PPID) of the NVMe PCIe SSD.
Capacity Displays the full capacity of the device.
Form Factor Displays the form factor of the NVMe PCIe SSD installed in the system.
Vendor ID Displays the hardware vendor of the device.
Product ID Displays the product ID of the device.
Serial No. Displays the serial number of the device.
PCIe Negotiated
Link Speed
Displays the speed of data transfer that the device negotiated upon initial communication. This speed is dependent
on the speed of the device.
PCIe Maximum Link
Speed
Displays the highest possible speed at which the device can transfer data.
PCIe Maximum Link
Width
Displays the link width of the device.
Form Factor Displays the form factor of the NVMe PCIe SSD installed in the system.
Running physical device tasks
1 Expand the Storage tree object to display the storage component objects.
2 Expand the PCIe SSD Subsystem object.
3 Select Physical Devices.
4 Select a task from the Available Tasks drop-down menu.
5 Click Execute.
NVMe PCIe SSD 2.5 inch SFF available tasks
The following are in the NVMe PCIe SSD drop-down menu:
• Blink
• Unblink
• Prepare to Remove
• Cryptographic Erase
20
Conguring and managing your NVMe PCIe SSD 2.5 inch SFF device