Users Guide

b Enter your user name and password.
c Navigate to the troubleshooting options.
d Enable the ESXi shell.
e Enable SSH.
4 Install the NVMe PCIe SSD driver on the ESXi host.
a Navigate to the datastore volume or le directory that contains the NVMe PCIe SSD driver, and run the following command:
esxcli software vib install /<complete_path_to_offline_driver>.
b Reboot the ESXi host.
5 Ensure that the driver has been correctly installed by running the following command: esxcli software vib list | grep
nvme.
6 Using vSphere, place the ESXi host in maintenance mode and reboot the host.
7 Once the host reboots and is running, take the host out of maintenance mode.
Driver installation 15