Users Guide

Setting LED blinking

The LED blink option allows you to identify a physical device in the system. To start or stop the feature:

1 Navigate to the Select Physical Device Operations menu in the HII Conguration Utility.

2 Select the Blink option to begin LED blinking, or the Unblink option to end LED blinking.

3 Press Esc to return to the previous screen.

4 To exit the HII Conguration Utility, click Exit in the top-right corner of the System Setup menu.

Exporting the log

The Export Log option exports the NVMe PCIe SSD log to a text le. The log contains debug information of the NVMe PCIe SSD which

can be useful while troubleshooting.

NOTE: To save the log, you need a writable media with a UEFI-compatible le system attached to the

system.

NOTE: If there are no application devices inserted into the system when entering the Export Log HII screen, then the only option

is to return to the previous page.

To export the NVMe PCIe SSD log from the HII conguration utility, do the following:

1 Navigate to the Export Log menu of the HII conguration utility.

2 Select the le system device to which the log will be exported.

3 Select the directory into which you want to save the log.

4 Enter the le name under which you want to save the log in the File Name text box.

For example, NVMe.log.

5 Click Export and follow the instructions to complete.

6 To exit the HII conguration utility, click Exit in the top-right corner of the System Setup menu.

Exiting the HII conguration utility

NOTE

: Clicking Exit in any HII page takes you back to the System Setup main menu.

NOTE: Press Esc from any HII page to return to the previous page.

To exit the HII conguration utility, click Exit in the top-right corner of the System Setup menu.

Conguring and managing your NVMe PCIe SSD 2.5 inch SFF device