User`s guide

Setting Up Integrated Mirroring 25
4 If you press Enter in Step 3, the next screen provides an opportunity (by pressing F3 ) to
confirm that data loss is OK. Or, press any other key to discard the changes.
5 After pressing F3 , you are returned to the Main menu. To verify the change in mirroring
properties, use the arrow keys to select an adapter. Then press
Enter to return to the Adapter
Properties screen.
6 Use the arrow keys to select Mirroring Properties , and press Enter.
You will now notice that the Volume SCSI ID value no longer exists, and that both devices are no
longer identified as part of a mirrored pair.
...Switch from SCSI to IM Mode
Refer to "Quick IM Configuration Procedure" on pages 16-17, or "Detailed IM Configuration
Procedure" on pages 17-21.
...Clone the OS Using the IM Controller
NOTE: This procedure cannot be accomplished using the Dell BIOS IM-5.08.06.
...Upgrade to a Larger Volume
If the user attempts to replace the secondary disk with a larger disk, the volume is created at the
same size as the original volume, and all data on the replaced disk is lost. If the user wishes to create
a larger volume, it is necessary to start from the beginning using larger disks. Refer to "Quick IM
Configuration Procedure" on pages 16-17.
Troubleshooting
Please refer to http://support.dell.com for troubleshooting information.