User`s guide

Setting Up Integrated Mirroring 19

Figure 3-3. Adapter Properties Screen

After an IM volume is configured, you can select

Synchronize Whole Mirror

on the Adapter

Properties screen to force a resynchronization of all blocks in the IM volume. The default is to

resynchronize only the blocks that are out of sync in the volume, as indicated by log entries.

NOTE: The following options are not supported and/or not configurable on this

platform: Secondary Cluster Server; CHS Mapping; Removable Media Support; Host

SCSI ID

On the Adapter Properties screen, use the arrow keys to select

Mirroring Properties

and then press

Enter

to go to the Mirroring Properties screen, which is shown in Figure 3-4.

Mirroring Properties Screen

Figure 3-4 shows the Mirroring Properties screen as it appears before an IM volume is configured.

PERC 4/IM | LSI Logic MPT SCSI Setup Utility Version MPTBIOS-IM-5.08.06

Adapter Properties

Adapter PCI

Bus

Dev/

Func

1020/1030 0 A0

Host SCSI ID

[7]

SCSI Bus Scan Order

[Low to High (0.. Max)]

Removable Media Support

[None]

CHS Mapping

[SCSI Plug and Play Mapping]

Spinup Delay (Secs)

[2]

Secondary Cluster Server

[No]

Termination Control

[Auto]

Esc=Abort/Exit Arrow Keys=Select Item -/+ = Change [Item]

Home/End=Select Item Enter=Execute <Item>