User`s guide

Installing and Configuring Hardware 53
Figure 4-9. PERC 6/E Adapter Dirty Cache LED Location
5 Press down on the tabs at each edge of the DIMM slot until the TBBU
pops out. Lift the TBBU off the adapter.
6 Disconnect the battery cable from the DIMM.
7 Detach the battery from the DIMM by pressing out on the battery clips
inserted through the DIMM and rotating the battery off the DIMM.
See Figure 4-10.
1 battery 3 dirty cache LED
2 memory module 4 PERC 6/E adapter
3
2
1
4
Dell_PERC6.2_UG.book Page 53 Wednesday, June 24, 2009 6:08 PM