User`s guide

Installing and Configuring Hardware 43
Figure 4-2. Installing a PERC 6/i Adapter
7 Tighten the bracket screw, if any, or use the system’s retention clips to
secure the controller to the system’s chassis.
8 For PERC 6/E adapter, replace the cover of the system. For more
information on closing the system, see the
Hardware Owner’s Manual
shipped with your system or on the Dell Support website at
support.dell.com .
1 PCI-e slot 3 filler brackets
2 PERC 6/i adapter 4 bracket screw
2
3
1
4
Dell_PERC6.2_UG.book Page 43 Wednesday, June 24, 2009 6:08 PM