Personal Computer User Manual

20 About Your System
E1422 CPU Machine Chk The system BIOS has reported a
machine check error.
See "Getting Help" on page 129.
E1610 PS # Missing Specified power supply is
improperly installed or removed.
See "Troubleshooting Power
Supplies" on page 105.
E1614 PS # Status Specified power supply is
improperly installed or faulty.
See "Troubleshooting Power
Supplies" on page 105.
E1618 PS # Predictive Power supply voltage is out of
acceptable range; specified power
supply is improperly installed or
faulty.
See "Troubleshooting Power
Supplies" on page 105.
E161C PS # Input Lost Power source for specified power
supply is unavailable, or out of
acceptable range.
Check the AC power source for
the specified power supply. If
problem persists, see
"Troubleshooting Power Supplies"
on page 105.
E1620 PS # Input Range Power source for specified power
supply is unavailable, or out of
acceptable range.
Check the AC power source for
the specified power supply. If
problem persists, see
"Troubleshooting Power Supplies"
on page 105.
E1624 PS Redundancy Power supply redundancy has
been lost. If the remaining power
supply fails the system will shut
down.
See "Troubleshooting Power
Supplies" on page 105.
E1625 PS AC Current Power source is out of acceptable
range.
Check the AC power source.
E1710 I/O Channel Chk The system BIOS has reported an
I/O channel check error.
See "Getting Help" on page 129.
E1711 PCI PERR B## D##
F##
PCI PERR Slot #
The system BIOS has reported a
PCI parity error on a component
that resides in PCI configuration
space at bus ##, device ##,
function ##.
The system BIOS has reported a
PCI parity error on a component
that resides in PCI slot #.
Remove and reseat the PCI
expansion cards. If the problem
persists, see "Troubleshooting
Expansion Cards" on page 113.
If the problem persists, the
system board is faulty. See
"Getting Help" on page 129.
Table 1-7. LCD Status Messages (continued)
Line 1
Message
Line 2
Message
Causes Corrective Actions