Reference Guide

Dependency Applicable only if 'RAIDrekey' is set to True
Storage.Controller.PatrolReadMode (Read or Write)
Description
Patrol Read is a feature for identifying disk errors in order to avoid disk failures and data loss or
corruption. The Patrol Read only runs on disks that are being used in a virtual disk or that are hot spares.
Legal Values
● Automatic
● Manual
● Disabled
Default Value Automatic
Write Privilege Server Configuration
License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise
Dependency None
Storage.Controller.PatrolReadRate (Read Only)
Description
The Patrol Read Rate is the percentage of the system's resources dedicated to perform Patrol Read.
Legal Values None
Default Value 30
Write Privilege None
License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise
Dependency None
Storage.Controller.PatrolReadUnconfiguredArea (Read or Write)
Description
Patrol Read is Performed on area of physical disk not configured for use.
Legal Values
● Disabled
● Enabled
Default Value Enabled
Write Privilege None
License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise
Dependency None
Storage.Controller.PersistHotspare (Read or Write)
Description
To enable or disable a persistent hotspare.
Legal Values
● Enabled
● Disabled
Default Value Disabled
Write Privilege Configure iDRAC
License Required iDRAC Express or iDRAC Enterprise
674 Storage Attributes