Reference Guide

NIC.FCOEConfiguration
The following section provides information about the objects in the NIC.FCOEConfiguration group.
NIC.FCoEConfiguration.BootOrderFirstFCoETarget (Read or
Write)
Description
Setting to specify whether and in what order a boot from the port's first defined target is attempted. The
current implementation allows for four potential boot targets to be defined per FCoE boot-capable port.
Each target carries a boot order attribute. From all of the targets defined in all the vendors FCoE boot
ports in the system, the user may select a maximum of four targets to attempt to boot from, assigning a
boot order value from one to four (first to last). Targets not selected must be given a value of 0. The
settings of one to four must be unique in the system; there must be no duplication of the values one to
four in either the same port or in different ports across the system. The driver will enforce this
requirement (a target previously assigned a boot order value of x is set to 0 when a new target is
assigned a value of x).
Legal Values
● N/A
Default Value 0
Write Privilege None
License Required iDRAC Express or iDRAC Enterprise
Dependency Not applicable
NIC.FCoEConfiguration.BootOrderFourthFCoETarget (Read or
Write)
Description
Setting to specify whether and in what order a boot from the ports fourth defined target is attempted.
Legal Values
● N/A
Default Value 0
Write Privilege None
License Required iDRAC Express or iDRAC Enterprise
Dependency Not applicable
NIC.FCoEConfiguration.BootOrderSecondFCoETarget (Read or
Write)
Description
Setting to specify whether and in what order a boot from the ports second defined target is attempted.
Legal Values
● N/A
Default Value 0
Write Privilege None
License Required iDRAC Express or iDRAC Enterprise
Dependency Not applicable
NIC Attributes 623