Reference Guide

iDRAC.Users.ProtocolEnable (Read or Write)
NOTE: The iDRAC.Users.SNMPv3AuthenticationType attribute is deprecated and replaced with
iDRAC.Users.ProtocolEnable attribute.
Description
Enable SNMP v3 Protocol
Legal Values
● Disabled-0
● Enabled-1
Default Value 0
Write Privilege Configure User
License Required iDRAC Basic
Dependancy None
iDRAC.Users.SHA1v3Key (Read or Write)
Description
Specifies the SHA1 hash of the SNMPv3 key
Legal Values
● String of up to 40 ASCII characters.
Default Value None
Write Privilege Configure User
License Required iDRAC Basic
Dependancy Cannot be set without User Name being set first
iDRAC.Users.SHA256Password (Read or Write)
Description
Specifies the SHA256 hash of the password
Legal Values
● String of up to 64 ASCII characters.
Default Value None
Write Privilege Configure User
License Required iDRAC Basic
Dependancy Cannot be set without User Name being set first
iDRAC.Users.SHA256PasswordSalt (Read or Write)
Description
Specifies the Salt String appended to the password prior to hash
Legal Values
● String of up to 32 ASCII characters.
Default Value None
Write Privilege Configure User
License Required iDRAC Basic
Dependancy Both User Name and SHA256 User password must be configured prior to sets
iDRAC Attributes 551