Reference Guide

License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise
Dependancy None
iDRAC.KMS
The objects in this group help to set username and password for the Key Management Server (KMS) connection.
NOTE: Run the racadm sekm enable command after changing any iDRAC KMS attributes. This action validates if the
changes are valid and iDRAC can communicate with the KMS.
iDRAC.KMS.iDRACPassword (Read or Write)
Description
Specifies the password for the iDRAC account on the Key Management server.
Legal Values
● String of up to 256 ASCII characters.
Default Value None
Write Privilege Configure iDRAC
License Required SEKM and iDRAC Enterprise
Dependancy None
iDRAC.KMS.iDRACUserName (Read or Write)
Description
Specifies the User Id on the Key Management server for this iDRAC.
Legal Values
● String of up to 64 ASCII characters.
Default Value None
Write Privilege Configure iDRAC
License Required SEKM and iDRAC Enterprise
Dependancy None
iDRAC.KMS.KMIPPortNumber (Read or Write)
Description
Specifies the KMIP Port Number for the Primary and Redundant Key Management Server.
Legal Values
● Integral values from 0 to 65535
Default Value 5696
Write Privilege Configure iDRAC
License Required SEKM and iDRAC Enterprise
Dependancy None
iDRAC.KMS.PrimaryServerAddress (Read or Write)
Description
Specifies the FQDN, IPv4 address or IPv6 address of the Primary Key Management Server.
Legal Values
● String of up to 254 ASCII characters.
iDRAC Attributes 441