Reference Guide

FC.HBAConfig.HardZone (Read or Write)
Description
Specifies the state of Fibre Channel hard zoning
Legal Values
● Enabled
● Disabled
Default Value Disabled
Write Privilege Server Configuration
License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise
Dependency Not Applicable
FC.HBAConfig.HardZoneAddress (Read or Write)
Description
Specifies the Hard Zone address to be used if Fibre Channel hard zoning is enabled
Legal Values None
Default Value 0
Write Privilege Server Configuration
License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise
Dependency Not Applicable
FC.HBAConfig.LinkDownTimeout (Read or Write)
Description
Specifies the number of milliseconds the Fibre Channel uplink port can be offline before the system is
notified that the SAN fabric connectivity is lost and the uplink port is marked as being down
Legal Values None
Default Value 3000
Write Privilege Server Configuration
License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise
Dependency Not Applicable
FC.HBAConfig.LoopResetDelay (Read or Write)
Description
Specifies the Fibre Channel Arbitrated Loop Reset Delay for the port. After resetting the loop, the
adapter firmware refrains from initiating any loop activity for the number of seconds specified in this
setting
Legal Values None
Default Value 5
Write Privilege None
License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise
Dependency Not Applicable
370 FC Attributes