Reference Guide

Legal Values
● Off
● OnConRedirAuto
● OnNoConRedir
● OnConRedirCom1
● OnConRedirCom2
● OnConRedir
Default Value Not Applicable
Write Privilege Server Control
License Required iDRAC Express or iDRAC Enterprise
Dependency Not applicable
BIOS.SerialCommSettings.SerialCommSettings (Read or Write)
Description
This field controls the Serial Communication options.
Legal Values
● N/A
Default Value Not Applicable
Write Privilege Server Control
License Required iDRAC Express or iDRAC Enterprise
Dependency Not applicable
BIOS.SerialCommSettings.SerialPortAddress (Read or Write)
Description
This field sets port address for the Serial Devices. (COM1=0x3F8, COM2=0x2F8) Note: Only Serial
Device 2 can be used for Serial Over LAN (SOL). To get Console Redirection via SOL, configure the same
port address for Console Redirection and Serial Device.
Blades: Com1, Com2 Monolithics: Serial1Com1Serial2Com2, Serial1Com2Serial2Com1
Legal Values
● Serial1Com1Serial2Com2
● Serial1Com2Serial2Com1
● Com1
● Com2
Default Value Not Applicable
Write Privilege Server Control
License Required iDRAC Express or iDRAC Enterprise
Dependency Not applicable
BIOS.SlotBifurcation
This group contains the attributes that provides details about BIOS.SlotBifurcation.
BIOS.SlotBifurcation.DellAutoDiscovery (Read or Write)
Description
Allow BIOS to dynamically scan for PCIe devices rather than relying strictly on system slot definitions. The
Platform Default setting will strictly follow the system slot definitions when configuring each PCIe slot.
The Auto Discovery setting will analyze the installed PCIe cards and determine the correct configuration
318 BIOS Attributes