Reference Guide

35
Using the Baseboard Management Controller
Table 1-
36
. Vendor OEM Commands (NETFUN: 34H, 35H)
Commands
NetFn
CMD
Request and Response
SetFanControl
OEM
61H
RE QUES T :
Byte 1 – Fan Control Setting
[7] - Enableed/Disabled FAN Control
0: Disabled(Default)
1: Enabled
[6:0] - Duty Cycle Setting. The rage is from 0
to 100, others are reserved.
RESPONSE:
Byte 1 — Completion code
GetFanControl
OEM
62H
RE QUES T :
(None)
RESPONSE:
Byte 1 — Completion code
Byte 1 – Fan Control Setting
[7] - Enableed/Disabled FAN Control
0: Disabled(Default)
1: Enabled
[6:0] - Duty Cycle Setting. The rage is from 0
to 100, others are reserved.