Reference Guide

30
Using the Baseboard Management Controller
www
. del l . com | s u ppo rt. d e ll. c o
m
Table 1-30. Dell OEM Commands (NETFUN: 30H, 31H)
Commands
NetFn
CMD
Request and Response
Reserve Extended
Configuration
OEM
01
REQUES T :
(None)
R E SPONSE:
Byte 1 — Completion code
Byte 2 — Reservation ID
Get Extended Config ura t ion
OEM
02
REQUES T :
Byte 1 — Reservation ID
Byte 2 — Configuration ID
Byte 3 — Attribute ID. 00H = Read
entire configuration data.
Byte 4 — Index (used by table object only)
Byte 5 — Data Offset – LSB
Byte 6 — Data Offset – MSB
Byte 7 — Bytes to read. FFH = Read
entire configuration or attribute
R E SPONSE:
Byte 1 — Completion code. 01H = No more
data.
Byte 2 — Configuration ID
Byte 3 — Attribute ID
Byte 4 — Index (valid for table object only)
Byte 5 — Number of bytes returned, 1-based
Byte 6~N — Data