Reference Guide

Option Description
NVMe Settings Provides options to change the NVMe settings. If the system contains the NVMe drives that you want to
configure in a RAID array, you must set both this field and the Embedded SATA field on the SATA
Settings menu to RAID mode. You might also need to change the Boot Mode setting to UEFI.
Otherwise, you should set this field to Non-RAID mode.
Boot Settings Provides options to specify the Boot mode (BIOS or UEFI). Enables you to modify UEFI and BIOS boot
settings.
Network Settings Provides options to manage the UEFI network settings and boot protocols.
Legacy network settings are managed from the Device Settings menu.
Integrated
Devices
Provides options to manage integrated device controllers and ports, specifies related features and
options.
Serial
Communication
Provides options to manage the serial ports, their related features and options.
System Profile
Settings
Provides options to change the processor power management settings, and memory frequency.
System Security Provides options to configure the system security settings, such as system password, setup password,
Trusted Platform Module (TPM) security, and UEFI secure boot. It also manages the power button on the
system.
Redundant OS
Control
Sets the redundant OS information for redundant OS control.
Miscellaneous
Settings
Provides options to change the system date and time.
System Information
You can use the System Information screen to view system properties such as Service Tag, system model name, and BIOS
version.
Viewing System Information
To view the System Information screen, perform the following steps:
Steps
1. Power on, or restart your system.
2. Press F2 immediately after you see the following message:
F2 = System Setup
NOTE:
If your operating system begins to load before you press F2, wait for the system to finish booting, and then
restart your system and try again.
3. On the System Setup Main Menu screen, click System BIOS.
4. On the System BIOS screen, click System Information.
System Information details
About this task
The System Information screen details are explained as follows:
6
Pre-operating system management applications