Error Reference Guide

POST Codes SR870BN4 Error Reference Guide
Revision 1.0
28
Code Value Module Display
0x0099 Configuring the timer data area and printer base address. South
0x009B Returned after setting the RS-232 base address. Performing any required initialization
before the Coprocessor test next.
South
0x009E Initialization after the Coprocessor test is complete. Checking the extended keyboard,
keyboard ID, and Num Lock key next. Issuing the Keyboard ID command.
South
0x00A2 Displaying any soft errors. South
0x00A3 The soft error display has completed. Setting the keyboard typematic rate. South
0x00A4 The keyboard typematic rate is set. Programming the memory wait states next. South
0x00A5 Memory wait state programming is over. Clearing the screen. South
0x00A7 Performing any initialization required before passing control to the adaptor ROM at
E000 next.
South
0x00AE Setting up DMI structures. South
0x0020 Talking to BMC South
0x0022 Talking to BMC. South
0x00AC Uncompressing the DMI data and initializing DMI POST. South
0x00AB Building the multiprocessor table. South
0x00AD Prepare INT10 image. Update the necessary data in different modules. South
0x00A8 Initialization before passing control to the adaptor ROM at E000h completed. Pass
control to the adaptor ROM at E000h.
South
0x00A9 Returned from adaptor ROM at E000h control. Performing any initialization required
after the E000 option ROM had control next.
South
0x00AA Initialization after E000 option ROM control has completed. Displaying the system
configuration.
South
0x00B1 Copying any runtime code to specific areas. South
0x0000 Code copying to specific areas is done. Pass control to EFI. South
7.2.2.5 EFI Module
The EFI POST codes have been redefined relative to previous platform implementations. Note
the addition of the module number and that bit 15 is set, indicating code for Itanium-based
platforms.
Table 10. EFI POST Codes
Code Value Module Display
0x85F0 Initialize the EFI FW memory map. South
0x85F1 Set up interrupt vector mappings in interrupt controller for EFI. South
0x85F2 Memory map installed. South
0x85F3 Basic EFI services are now functional. Although no devices or variable store support is
on line. InitializeLib.
South
0x85F4 Init Watchdog Timer. Initialize support for calling BIOS functions Initialize Bios Int Caller.
Install base devices. This would at least include a global_IO device, all NV ram store
device(s), and the timer tick. It may optionally include other_IO devices. Install Base
Devices.
South
0x85F5 Nv Store installed. South
0x85F6 Install consoles device, and notify EFI FW to pick and enable a console. South
0x85F7 Consoles installed. South