Conversion Guide

Tower-to-Rack Conversion Guide 9

• Installing the optional 1x2 flex bay bracket

• Installing the shoulder nuts and plastic filler panels

• Removing the rack doors

• Installing the system in the rack

• Installing the cable-management arm

• Routing the system cables

• Installing the rack bezel

• Installing the rack doors

Removing the Bezel

1 Unlock the keylock at the right side of the bezel.

See

Figure 1-2

While grasping the bezel, push the release latch on top of the bezel to the right.

Rotate the top of the bezel away from the front panel.

Unhook the bottom of the bezel and pull the bezel away from the system.

See

Figure 1-2

book.book Page 9 Friday, May 26, 2006 3:03 PM