User guide

Installing the Tower Left-Side Trim Panel
^ NOTE: It may be more convenient to set the chassis upright in the tower position
whiie instaiiing the ieft-side trim panei.
Position the tower left-side trim panel into position with the baek end extending
12.7 millimeters (0.5-ineh) beyond the baek of the ehassis, and then slide the side trim
panel toward the front panel until it stops.
^ NOTE: You may need to tiit the chassis siightiy to provide ciearance for instaiiing the
ieft-side trim panei.
Cheek to see that the trim panel is flush with the front of the system ehassis.
Installing the Tower Front Panel
1 Install the tower front panel on the front of the ehassis (see Figure 1-6), and seeure it
with 16 T-10 Torx serews.
2 Reinstall the hard drives into their proper slots.
Figure 1-6. Installing the Tower Front Panel
Rack-to-Tower Conversion Guide | 1-11