Reference Guide

698 QoS Commands
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
The following example displays all the configuration information for the class
named "Dell".
console#show class-map
Class L3
Class Name Type Proto Reference Class Name
------------------------------- ----- ----- -----------------------------
ipv4 All ipv4
ipv6 All ipv6
stop_http_class All ipv6
match_icmp6 All ipv6
console#show class-map ipv4
Class Name..................................... ipv4
Class Type..................................... All
Class Layer3 Protocol.......................... ipv4
Match Criteria Values
---------------------------- -------------------------------------
Source IP Address 2.2.2.2 (255.255.255.0)
console#show class-map stop_http_class
Class Name..................................... stop_http_class
Class Type..................................... All
Class Layer3 Protocol.......................... ipv6
Match Criteria Values
2CSPC4.XModular-SWUM204.book Page 698 Friday, March 15, 2013 9:24 AM