Reference Guide

692 QoS Commands
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
The CLI mode is changed to Policy-Class-Map Configuration when this
command is successfully executed.
The policy type dictates which of the individual policy attribute commands
are valid within the policy definition.
Example
The following example shows how to establish a new ingress DiffServ policy
named "DELL."
console(config)#policy-map DELL in
console(config-policy-classmap)#
random-detect queue-parms
Use the random-detect queue-parms command to configure the WRED
green, yellow and red TCP and non-TCP packet minimum and maximum
thresholds and corresponding drop probabilities on an interface or all
interfaces.
Syntax
random-detect queue-parms queue-id [queue-id] ... min-thresh minthresh-
green minthresh-yellow minthresh-red minthresh-nontcp
max-thresh max-
thresh-green max-thresh-yellow max-thresh-red maxthresh-nontcp
no random-detect queue-parms queue-id [queue-id] ...
2CSPC4.XModular-SWUM204.book Page 692 Friday, March 15, 2013 9:24 AM