Reference Guide

Port Aggregator Commands 625
Syntax
vlan [add | remove] <vlan-list>
vlan-list — A list of VLANs. Separate nonconsecutive VLANs with a comma
and no spaces. Use a hyphen to designate a range of VLANs.
Default Configuration
By default, the native VLAN is a member of the port aggregator group.
Command Mode
Port Aggregator mode
User Guidelines
VLANs that have not yet been created may be added to the port aggregator
group. They will be made active after creation.
Example
Set port aggregator group 1 to use VLAN 10 exclusively.
console(config)#port-aggregator-group 1
console(config-aggregator-1)#vlan add 10
console(config-aggregator-1)#vlan remove 1
2CSPC4.XModular-SWUM204.book Page 625 Friday, March 15, 2013 9:24 AM