Reference Guide

Port Aggregator Commands 621
negotiation
Use the negotiation command in port aggregator mode to enable auto-
negotiation of all member ports in the aggregator group/zone. To disable
negotiation, use the no form of this command.
Syntax
negotiation
no negotiation
Default Configuration
This command has no default configuration.
Command Mode
Port Aggregator mode
User Guidelines
This command is only available in simple mode.
Example
console(config)#port-aggregator group 1
console(config-aggregator-1)#negotiation
console(config-aggregator-1)#
no lacp
Use the no lacp command to set the LACP (Link Aggregation) mode to
default for that Aggregator Group. The default LACP mode is dynamic.
Syntax
no lacp
Default Configuration
This command has no default configuration.
2CSPC4.XModular-SWUM204.book Page 621 Friday, March 15, 2013 9:24 AM