Reference Guide

618 Port Aggregator Commands
lacp off
Use the lacp off command to set the LACP (Link Aggregation) mode to off
for that Aggregator Group. This means that when more than one uplink port
is in the Group, all the uplinks are shut down except the lowest numbered
one.
Syntax
lacp off
Default Configuration
This command has no default configuration.
Command Mode
Port Aggregator mode
User Guidelines
This command is only available if simple mode is enabled.
Example
console(config)#port-aggregator group 2
console(config-aggregator-2)#lacp off
console(config-aggregator-2)#
lacp static
Use the lacp static command to set the LACP (Link Aggregation) mode to
static for that Aggregator Group. This means that when more than one uplink
port is in the Group, those uplink ports will be enabled automatically with
static LACP.
Syntax
lacp static
2CSPC4.XModular-SWUM204.book Page 618 Friday, March 15, 2013 9:24 AM