Reference Guide

IP Addressing Commands 503
User Guidelines
This command has no user guidelines.
Example
The following example enables the IP Domain Naming System (DNS)-based
host name-to-address translation.
console(config)#ip domain-lookup
ip domain-name
Use the ip domain-name command in Global Configuration mode to define
a default domain name used to complete unqualified host names. To delete
the default domain name, use the no form of this command.
Syntax
ip domain-name name
no ip domain-name
• name — Default domain name used to complete an unqualified host
name. Do not include the initial period that separates the unqualified host
name from the domain name (Range: 1-255 characters).
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example defines a default domain name of dell.com.
console(config)#ip domain-name dell.com
2CSPC4.XModular-SWUM204.book Page 503 Friday, March 15, 2013 9:24 AM