Reference Guide

Ethernet Configuration Commands 425
Example
The following example displays the description for all interfaces.
console>show interfaces description
Port Description
---- ------------------------------------------------
1/0/1 Port that should be used for management only
2/0/1
2/0/2
Ch Description
---- -----------
1 Output
show interfaces detail
Use the show interfaces detail command in Privileged EXEC mode to display
detailed status and configuration of the specified interface.
Syntax
show interfaces detail <interface-id>
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
Field Description
interface-id A physical interface or port channel identifier.
2CSPC4.XModular-SWUM204.book Page 425 Friday, March 15, 2013 9:24 AM