Reference Guide

Ethernet Configuration Commands 411
Command Mode
Privileged EXEC mode
User Guidelines
Use of the clear counters command with no parameters indicates that both
switch and all interface statistics are to be cleared.
Example
In the following example, the counters for port 1/0/1 are cleared.
console#clear counters gigabitethernet 1/0/1
description
Use the description command in Interface Configuration mode to add a
description to an interface. To remove the description use the no form of this
command.
Syntax
description string
no description
• string — Comment or a description of the port attached to this interface.
(Range: 1 to 64 characters)
Default Configuration
By default, the interface does not have a description.
Command Mode
Interface Configuration (gigabitethernet, port-channel, tengigabitethernet)
mode
User Guidelines
This command has no user guidelines.
2CSPC4.XModular-SWUM204.book Page 411 Friday, March 15, 2013 9:24 AM