Reference Guide

338 CDP Interoperability Commands
Compiled Wed 21-Mar-07 12:20 by tinhuang
show isdp interface
The show isdp interface command displays ISDP settings for the specified
interface.
Syntax
show isdp interface {all | gigabitethernet unit/slot/port | tengigabitethernet
unit/slot/port}
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
There are no user guidelines for this command.
Example
console#show isdp interface all
Interface Mode
--------------- ----------
1/0/1 Enabled
1/0/2 Enabled
1/0/3 Enabled
1/0/4 Enabled
1/0/5 Enabled
1/0/6 Enabled
1/0/7 Enabled
2CSPC4.XModular-SWUM204.book Page 338 Friday, March 15, 2013 9:24 AM