Reference Guide

AAA Commands 263
Default Configuration
This command has no default configuration.
Command Mode
aaa IAS User Configuration
User Guidelines
This command has no user guidelines.
Example
console#configure
console(config)#aaa ias-user username client-1
console(Config-IAS-User)#password client123
console(Config-IAS-User)#no password
Example of a adding a MAB Client to the Internal user database:
console#configure
console(config)#aaa ias-user username 1f3ccb1157
console(Config-IAS-User)#password 1f3ccb1157
console(Config-IAS-User)#exit
console(config)#
password (Line Configuration)
Use the password command in Line Configuration mode to specify a
password on a line. To remove the password, use the no form of this
command.
NOTE: For commands that configure password properties, see Password
Management Commands on page 1551.
Syntax
password password [encrypted]
2CSPC4.XModular-SWUM204.book Page 263 Friday, March 15, 2013 9:24 AM