Reference Guide

Using the CLI 190
Router OSPF
Conf
From Global
Configuration
mode, use the
router ospf
command.
console(config-router)#
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
EXEC mode
Router RIP
Config
From Global
Configuration
mode, use the
router rip
command.
console(config-router)#
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
EXEC mode
Router OSPFv3
Config
From Global
Configuration
mode, use the ipv6
router ospf
command.
console(config-rtr)#
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
EXEC mode
IPv6 DHCP Pool
Mode
From Global
Configuration
mode, use the ipv6
dhcp pool
command.
console(config-dhcp6s-
pool)#
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
EXEC mode
Interface Configuration Modes
Table 2-5. Navigating CLI Command Modes
(continued)
Command Mode Access Method Command Prompt Exit or Access
Previous Mode
2CSPC4.XModular-SWUM204.book Page 190 Friday, March 15, 2013 9:24 AM