Reference Guide

System Management Commands 1759
Default Configuration
port — Telnet port (decimal 23) on the host.
Command Mode
User EXEC, Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
Following is an example of using the telnet command to connect to
176.213.10.50.
console#telnet 176.213.10.50
Esc U sends telnet EL
traceroute
Use the traceroute command in Privileged EXEC mode to discover the IP
routes that packets actually take when traveling to their destinations.
Syntax
traceroute [ ip | ipv6 ] ipaddress | hostname [ initTtl initTtl ] [ maxTtl
maxTtl ] [ maxFail maxFail ] [ interval interval ] [ count count ] [ port port ]
[ size
size ][source {<src-ip-address>|vlan <vlan-id>|loopback <loop-
id>}]
time Time 37
uucp Unix-to-Unix Copy Program 540
whois Nickname 43
www World Wide Web 80
Keyword Description Port Number
2CSPC4.XModular-SWUM204.book Page 1759 Friday, March 15, 2013 9:24 AM