Reference Guide

1736 System Management Commands
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC modes, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Examples
Example – Stack Status for the Switch
The following example displays stack status information for the switch.
console#show switch 1
Switch............................ 1
Management Status................. Management Switch
Switch Type....................... 0x68200001
Preconfigured Model Identifier.... PCM8024-k
Plugged-in Model Identifier....... PCM8024-k
Switch Status..................... OK
Switch Description................ PowerConnect M8024-k
Detected Code Version............. I.9.30.4
Detected Code in Flash............ I.9.30.4
SFS Last Attempt Status........... None
stack–member–number The stack member number.
stack–ports Display summary stack-port information for all interfaces.
counters Display summary data counter information for all interfaces.
diag Display front panel stacking diagnostics for each port.
stack–standby Display the configured or automatically selected standby
unit number.
Parameter Description
2CSPC4.XModular-SWUM204.book Page 1736 Friday, March 15, 2013 9:24 AM