Reference Guide

1732 System Management Commands
• cardindex — Displays the index into the database of the supported card
types. This index is used when preconfiguring a slot.
The following table explains the output parameters.
If you supply a value for
cardindex , the following additional information
appears as shown in the table below.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Config mode and all Config sub-modes
User Guidelines
The CID information is used when pre-configuring cards using the slot
command.
Parameter Description
Card Index (CID) The index into the database of the
supported card types. This index is used
when preconfiguring a slot.
Card Model Identifier The model identifier for the supported
card type.
Parameter Description
Card Type The 32-bit numeric card type for the
supported card.
Model Identifier The model identifier for the supported
card type.
Card Description The description for the supported card
type.
2CSPC4.XModular-SWUM204.book Page 1732 Friday, March 15, 2013 9:24 AM