Reference Guide

System Management Commands 1725
Restart In Progress............................ No
Warm Restart Ready............................. Yes
Copy of Running Configuration to Backup Unit:
Status...................................... Stale
Time Since Last Copy........................ 0 days 4 hrs 53 mins 22 secs
Time Until Next Copy........................ 28 seconds
Unit NSF Support
---- -----------
1 Yes
2 Yes
3 Yes
show power-usage-history
Use the show power-usage-history command in Privileged EXEC mode to
display the history of unit power consumption for the unit specified in the
command and total stack power consumption. Historical samples are not
saved across switch reboots/reloads.
Syntax
show power-usage-history unit-id
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
There are no user guidelines for this command.
Parameter Description
unit-id Stack unit for which to display the power history. Range 1-12.
2CSPC4.XModular-SWUM204.book Page 1725 Friday, March 15, 2013 9:24 AM