Reference Guide

System Management Commands 1715
Are you sure you want to reload the switch? (y/n) y
Reloading management switch 1.
set description
Use the set description command in Stack Global Configuration mode to
associate a text description with a switch in the stack.
Syntax
set description unit description
• unit — The switch identifier. (Range: 1–12)
•
description — The text description. (Range: 1–80 alphanumeric
characters)
Default Configuration
This command has no default configuration.
Command Mode
Stack Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example displays
console(config)#stack
console(config-stack)#set description 1 “unit 1"
slot
NOTE: The slot command is only available to be used on PCM6348
when it is a master switch in a mixed stack of PCM6348/PC7000 switches to
configure the slot on a slave PC7000 switch.
2CSPC4.XModular-SWUM204.book Page 1715 Friday, March 15, 2013 9:24 AM