Reference Guide

Command Groups 166
Telnet Server
Terminal Length
Time Ranges
switch renumber Changes the identifier for a switch in the stack. GC
telnet Logs into a host that supports Telnet. PE
traceroute Discovers the IP routes that packets actually
take when travelling to their destinations.
PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 81.
Command Description Mode
a
a. For the meaning of each Mode abbreviation, see Mode Types on page 81.
ip telnet server disable Enables/disables the Telnet service on the
switch.
GC
ip telnet port Configures the Telnet TCP port number on the
switch.
GC
show ip telnet Displays the status of the Telnet server and the
Telnet TCP port number.
PE
Command Description Mode
a
a. For the meaning of each Mode abbreviation, see Mode Types on page 81.
terminal length Sets the terminal length. PE
Command Description Mode
a
time-range Creates a time range identified by name,
consisting of one absolute time entry and/or one
or more periodic time entries.
GC
absolute Adds an absolute time entry to a time range. TRC
periodic Adds a periodic time entry to a time range. TRC
Command Description Mode
a
2CSPC4.XModular-SWUM204.book Page 166 Friday, March 15, 2013 9:24 AM