Reference Guide

Command Groups 165
show sessions Displays a list of the open telnet sessions to
remote hosts.
PE
show slot Displays information about all the slots in the
system or for a specific slot.
UE
show supported cardtype Displays information about all card types
supported in the system.
UE
show supported
switchtype
Displays information about all supported switch
types.
UE
show switch Displays information about the switch status. UE
show system Displays system information. UE
show system fan
Explicitly displays the fan status.
UE or PE
show system id Displays the service ID information. UE
show system power Displays information about the system level
power consumption.
UE or PE
show system
temperature
Displays information about the system
temperature and fan status.
UE or PE
show tech-support Displays system and configuration information
(for debugging/calls to technical support).
PE
show users Displays information about the active users,
including which profiles have been assigned to
local user accounts and which profiles are active
for logged-in users.
PE
show version Displays the system version information. UE
stack Sets the mode to Stack Global Configuration
mode.
GC
stack-port Sets the mode to Stack Global Configuration
mode to configure Stack ports as either
Stacking ports or as Ethernet ports.
The stacking commands (stack-port, standby,
switch renumber, etc.) are supported on
PCM8024-k, but not on the PCM8024.
GC
standby Configures the standby in the stack. SG
Command Description Mode
a
2CSPC4.XModular-SWUM204.book Page 165 Friday, March 15, 2013 9:24 AM