Reference Guide

SNMP Commands 1643
User Guidelines
The group-name parameter can be used to restrict the access rights of a
community string. When it is specified, the software:
• Generates an internal security-name.
• Maps the internal security-name for SNMPv1 and SNMPv2 security
models to the group-name.
Example
The following example maps a community access string dell_community to
group dell_group.
console(config)# snmp-server community-group dell_community dell_group 192.168.29.1
snmp-server contact
Use the snmp-server contact command in Global Configuration mode to set
up a system contact (sysContact) string. To remove the system contact
information, use the no form of the command.
Syntax
snmp-server contact text
no snmp-server contact
• text — Character string, 0 to 160 characters, describing the system contact
information.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
2CSPC4.XModular-SWUM204.book Page 1643 Friday, March 15, 2013 9:24 AM