Reference Guide

Command Groups 164
ip address {dhcp/bootp} Enables DHCP/BOOTP on the OOB port. IC (out-
of-band)
login-banner Enables login banner on the console, telnet, or
SSH connection.
LC
member Configures the switch. SG
motd-banner Enables motd on the console, telnet, or SSH
connection.
LC
nsf Specifies non-stop forwarding. GC
ping Sends ICMP echo request packets to another
node on the network.
UE
reload Reloads the operating system. PE
set description Associates a text description with a switch in
the stack.
SG
slot Configures a slot in the system. GC
show banner Displays banner information. PE
show boot-version Displays the boot image version details. UE
show checkpoint
statistics
Displays the statistics for the checkpointing
process.
PE
show cut-through mode Show the cut-through mode on the switch. PE
show interfaces
advanced firmware
Displays the firmware revision of the PHY for a
port.
PE
show ip interface out-of-
band
Disables DHCP/BOOTP on the OOB port. PE
show memory cpu Checks the total and available RAM space on
the switch.
PE
show nsf Shows non-stop forwarding status. PE
show power-usage-
history
Shows the history of unit power consumption
for the unit specified in the command and total
stack power consumption.
PE
show process cpu Checks the CPU utilization for each process
currently running on the switch.
PE
Command Description Mode
a
2CSPC4.XModular-SWUM204.book Page 164 Friday, March 15, 2013 9:24 AM