Reference Guide

Command Groups 163
System Management
show logging file Displays the state of logging and the syslog
messages stored in the logging file.
PE
show syslog-servers Displays the syslog servers settings. PE
terminal monitor Enables the display of logging messages on the
terminal.
PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 81.
Command Description Mode
a
asset-tag Specifies the switch asset-tag. GC
banner exec Sets the message that is displayed after a
successful login.
GC
banner login Sets the message that is displayed just before
the login prompt.
GC
banner motd Specifies message-of-the-day banner. GC
banner motd
acknowledge
Acknowledges message-of-the-day banner. GC
clear checkpoint
statistics
Clears the statistics for the checkpointing
process.
GC
clear counters stack-
ports
Clears the statistics for all stack-ports. PE
cut-through mode Enables the cut-through mode on the switch. GC
exec-banner Enables exec banner on the console, telnet or
SSH connection.
LC
hostname Specifies or modifies the switch host name. GC
initiate failover Forces failover of management unit. GC
ip address Sets a static OOB port IP address. IC (out-
of-band)
ip address none Disables DHCP/BOOTP on the OOB port. IC (out-
of-band)
Command Description Mode
a
2CSPC4.XModular-SWUM204.book Page 163 Friday, March 15, 2013 9:24 AM