Reference Guide

1518 Configuration and Image File Commands
33 : exit
34 : snmp-server community public rw
35 : exit
update bootcode
Use the update bootcode command in Privileged EXEC mode to update the
bootcode on one or more switches. For each switch, the bootcode is extracted
from the active image and programmed to flash.
Syntax
update bootcode [ unit ]
• unit —Unit number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
If unit is not specified, all units are updated.
Example
The following example updates the bootcode on unit 2.
console#update bootcode 2
write
Use the write command to copy the running configuration image to the
startup configuration.
2CSPC4.XModular-SWUM204.book Page 1518 Friday, March 15, 2013 9:24 AM